Sunday, October 17, 2010

Share WiFi with your neighbors - the creation of a Wi-Fi hotspot in your neighborhood

Most of the time the Internet connection is not used to its full potential. Increase speed cable and DSL Internet connections for home computers with much more support than it is connected. If you use the computer only for a few hours each day, consider sharing your Internet connection with relatives and neighbors to be used to optimize costs.

Strong signal - a good external antenna

The most important aspect of the race is becoming a hotspota strong signal to your neighbors. The best option is to mount an external antenna as high as possible on your property. Antenna can be expensive so it is round for a good deal on Ebay. I would recommend a 6 dB omni-directional external antenna for most people.

Be aware of different types of antenna connectors. I like the RP-TNC connector is located on the Linksys WRT54GL router, because it is more durable than the small RP-SMA connector used on another kit. If you do not knowwhere you can connect customers to a better omni-directional antenna. If you know where you connect to a "patch" or a directional antenna to get.

Strong signal - a short antenna lead.

In designing the antenna system as soon as you can carry between the router and WiFi hotspots. For a good signal to try to bring in less than 6 'to maintain. A good solution is to install the WLANRouter mounted in a weatherproof box or Tupperware and put it on the antenna. You must turn on the power source and turn on the pole, but I think it gives the best results. The safest way to feed the post on foot wall wart at home and read to participate in a path of low voltage cable to the pole.

The choice of a router - Linksys WRT54GL Awesome

The WRT54GL WiFi router can be purchased for a minimum of $ 50. You can easilyhave replaced the firmware with OpenWRT or DD-WRT and small versions of Linux that can run the software directly to your router. Then you can install the software on routers and hotspots in less than 5 minutes you can feed a WiFi hotspot for under $ 100.

How to control access to your WiFi hotspot.

The best thing to do is to leave your WiFi router open without encryption. So anyone can use for free. If you want tosome control over who uses the system or if you want to make some money system These are the main options:

MAC address filtering. The MAC address is a unique number to each device and network access. A MAC address looks like this: 01:23:45:67:89: AB, most WiFi routers have the ability to access to only certain MAC addresses to the network. You can set up MAC filtering on your wireless router or contact your neighbors and if one of them wanted tothe share of the cost of connection, you can add to the list of approved MAC addresses.

WPA Key. Another approach is to configure WPA encryption on the router. When prompted to set it as a WPA password. We could then give the key to get in, the neighbors who wanted to connect to your Internet connection.

The Captive Portal. Almost all commercial hotspot captive portals, which appears as an open or secured WiFisignal, but then redirects all traffic to a specific web page called "splash page" that is frequently asked to login or access the Internet now. Your home page is an ad for your WiFi service, so you might want to list what they charge for access. A captive portal is great, if you do not have to visit the neighbors to see who you want to connect, each one connected to your WiFi hotspot is redirected to the home page. You can also set up an automated systemPay Pal to pay for access to the Internet and could not even have to be at home to make money.

Good luck with your new WLAN.

Related : World Of Wii Store

No comments:

Post a Comment